| Table of Contents |
|---|
FIX Client Simulator 3.8.0
FIX Client Simulator 3.8.0 is released on
New Features and Improvements
| Expand | ||
|---|---|---|
| ||
FIX Client Simulator now provides the ability to select incoming Order Single (35=D) message in the Events Viewer section and automatically form the Execution Report (35=8) with 39=8 to send in running Initiator or Acceptor session (reject). |
| Expand | ||
|---|---|---|
| ||
When working on test scenarios at the stages “Expect”, “Expect Until”, and “ExpectThenSend”, the tags that go into specific repeating groups can already be validated, not just based on a particular tag but also with an asterisk (*) instead of 0,1,2, etc. |
| Expand | ||
|---|---|---|
| ||
FIX Client Simulator now has Balance quantities checkbox which allows checking the messages “Partial Fill” and “Fill”, balance 32, 14, 151 tags by filling empty values with correct values according to the order flow when "Balance order quantities" is set and incoming message is New Order Single. If Partly Fill, and Fill do not contain some of tags 32, 14, 151, the tags will be added. If the user sets some of the tags to have an incorrect value (too big or too small), the tags will be filled in with correct values. Additionally, tag 6 (AvgPx) is being calculated. |
| Expand | ||
|---|---|---|
| ||
FIX Client Simulator now has been updated with button “duplicate command” as well as other commands have been changed to icons instead of wording. |
| Expand | ||
|---|---|---|
| ||
Coloring on the active test scenario button has been added to make it easier to define the running scenario among others as well as the name of the running session is being displayed under “Session” column. |
| Expand | ||
|---|---|---|
| ||
With 3.8.0 release it is already possible to manually configure the delays between messages in ExpectThenSend command Parameter. Additionally, the random delay interval can be set up with minimum and maximum values as well as fractional values are possible for seconds. |
| Expand | ||
|---|---|---|
| ||
Now the horizontal scroll bar will be displayed in Event viewer only when it’s needed. |
Fixed Bugs
- Fixed issue with test execution time being displayed incorrectly if it is higher than 1h
- Fixed issue with error message not being shown when user trying to run Test Scenario after scenario file being deleted
FIX Client Simulator 3.7.0
FIX Client Simulator 3.7.0 is released on .
...
Expand title Ability to autogenerate Order Status Request (35=H) for incoming New Order Single (35=D) and outgoing Execution Report (35=8) messages. FIX Client Simulator now provides the ability to autogenerate the Order Status Request (35=H) message for incoming New Order Single (35=D) and outgoing Execution Report (35=8) messages in the Events Viewersection.
The new message will be autogenerated according to the attached FIX dictionary file using the tag values present in the initial FIX message.
The autogenerated Order Status Request (35=H) message will be added to the Send Message section.
Expand title Ability to autogenerate Execution Report (35=8) for incoming Order Status Request (35=H) messages. FIX Client Simulator now provides the ability to autogenerate the Execution Report (35=8) for incoming Order Status Request (35=H) messages in the Events Viewer section.
The new message will be autogenerated according to the attached FIX dictionary file using the tag values present in the initial FIX message.
The autogenerated Execution Report (35=8) message will be added to the Send Message section.
Expand title Ability to autogenerate Order Cancel Reject (35=9) for incoming Order Cancel Request (35=F) and Order Cancel/Replace Request (35=G) messages. FIX Client Simulator now provides the ability to autogenerate the Order Cancel Reject (35=9) message for the incoming Order Cancel Request (35=F) and Order Cancel/Replace Request (35=G) messages in the EventsViewer section.
The new message will be autogenerated according to the attached FIX dictionary file using the tag values present in the initial FIX message.
The autogenerated Order Cancel Reject (35=9) message will be added to the Send Message section.
Expand title TLS v1.3 support for FIX sessions. It is possible now to configure FIX sessions using TLS v1.3 protocol version.
Expand title Ability to send FIX messages with delay using the OnMessage handler. The OnMessage handler now provides the ability to specify, whether messages from the Then Send section must be sent:
- with the specified probability
- immediately
- with the specified delay
- with the random delay
Expand title Ability to generate tag values in different formats. FIX Client Simulator now provides the ability to generate values in different formats for tags in the Command Parameter window while creating a new Test Scenario:
- guid - ${guid}
- number - ${random(0, 10)}
- current timestamp - ${timestamp}
Expand title Ability to configure system directory to store created Test Scenarios. FIX Client Simulator now provides the ability to define the path to the system directory where all created Test Scenarios will be stored.
The new optional TestScenarioFolder property is added to the Fcs.exe.config configuration file.
Expand title Ability to copy the message from the Events Viewer section without timestamps. FIX Client Simulator now provides the ability to copy FIX messages from the Events Viewer section to the clipboard without timestamps.
To copy the message from the Events Viewer section to the clipboard without a timestamp this message must be right-clicked on and then the Smart Copy action must be selected in the Context Menu.
The Smart Copy action also allows copying the whole message even if only its part is selected.
...
Expand title Ability to run Test Scenario in the infinite loop to simulate FIX messages flow. The new OnMessage handler is introduced enabling users to define the Expect Then Send instruction.
This instruction will be executed in the infinite loop simulating FIX messages flow.
Expand title Events and messages filtering within the Events Viewer section. Events and messages in the Events Viewer section now can be filtered using the Filter text field.
All special symbols are supported except '/'.
Expand title Customizable title for main FCS window. FIX Client Simulator allows customizing the title of the main application window by defining the MainWindowTitle property in the Fcs.exe.config file.
...
Expand title Ubuntu Linux and Rocky Linux support. FIX Client Simulator is now available on Ubuntu Linux 22.04 and Rocky Linux 8.
...
Expand title The ability to manually create, automatically record, edit and run test scenarios. FIX Client Simulator now provides the ability to manually create, automatically record and run created test scenarios in the new Test Scenarios tab added to the main FCS screen.
Also, it is possible to Edit, Rename and Remove existing test scenarios.
Please refer to the Create and run test scenarios for more details.
FIX Client Simulator 3.3.0
...
Expand title The ability to autogenerate Order Cancel Request (35=F) and Order Cancel/Replace Request (35=G) messages for outgoing New Order Single (35=D) and incoming Execution Report (35=8) messages. FIX Client Simulator now provides the ability to autogenerate Order Cancel Request (35=F), Order Cancel/Replace Request (35=G) messages for outgoing New Order Single (35=D) and incoming Execution Report (35=8) messages in the Events Viewer section.
The new message will be autogenerated according to the attached FIX dictionary file using the tag values present in the initial FIX message.
The autogenerated message will be added to the Send Message section.
Expand title The ability to autogenerate New, Filled and Partially Filled Execution Report (35=8) messages for incoming New Order Single (35=D) message. FIX Client Simulator now provides the ability to autogenerate New, Partially Filled, and Filled Execution Report (35=8) for incoming New Order Single (35=D) messages in the Events Viewer section.
The new message will be autogenerated according to the attached FIX dictionary file using the tag values present in the initial FIX message.
The autogenerated message will be added to the Send Message section.
Expand title The ability to restore logs in the Events Viewer section after the session restart. FIX Client Simulator now provides the ability to restore session log files in the Events Viewer section after the session restart.
The new DaysToKeepEventViewLogs property defining the number of days for which the session logs must be restored is added to the Fcs.exe.config file.
Expand title The ability to copy the whole message or only its part from the Events Viewer section. FIX Client Simulator now provides the ability to copy the whole FIX messages or only their parts from the Events Viewer section to the clipboard.
To copy the whole message from the Events Viewer section to the clipboard this message must be right-clicked on and then the Copy Message action must be selected in the Context Menu.
To copy the part of the message from the Events Viewer section to the clipboard this part of the message must be selected/highlighted and right-clicked on and then the Copy action must be selected in the Context Menu.
...
Expand title Improved the reset of the 'Autoincrement tags' functionality. FIX Client Simulator now does not reset selected tag values auto-incrementation in the following cases:
- When a new message was added or the old message was deleted from the Send Message section.
- When the message was changed in the Send Message section, even if this message became non-parsable (e.g. the SOH symbol was added near another SOH).
- When the value of the auto-incrementing tag was changed for the message in the Send Message section.
Expand title The ability to copy the part of the message from the Events Viewer section. FIX Client Simulator now provides the ability to copy only part of the FIX message (e.g. tag=value or only value) from the Events Viewer section.
In such a case, the selected text will be highlighted in blue, and the whole message will be highlighted in white.
Expand title The ability to store the user.config configuration file in the current working directory. The new StoreSettingsInCurrentWorkingFolder property was added to the Fcs.exe.config configuration file.
This property defines whether the user.config file must be stored in the default or current working directory.
To store the user.config configuration file in the current working directory the StoreSettingsInCurrentWorkingFolder property must be set to 'true'.
...
New Features and Improvements
- The ability to replay QuickFIX log files.
- The ability to set the initial tag value for auto-increment.
- FIXLatest application version support.
...
Expand title The ability to send or resend only selected messages from the log file. To use this functionality a log file must be loaded to FIX Client Simulator and particular message(s) from this file must be selected in the Send Message tab.
Expand title The ability to send or resend messages from the log file one by one. The ability to send the selected message(s) and automatically select the next message for sending was added.
...
New Features and Improvements
- Event viewer interface is updated with the following
- Added checkboxes: Timestamps, Header/Trailer, Application, Session and Split Window
- Incoming, Outgoing and Console messages are highlighted with different colors for visual usability and can be split with Split Window checkbox
- Multiple custom dictionaries support
Fixed bugs
- Error sending messages containing internal raw FIX messages from Send Message tab.
...
New Features and Improvements
- Display administrative messages in console
- Create message from template
- “Send Message“ functionality extended to work with multiple messages
- “Send message“ window visualization was improved with highlighted "tag=" and rich undo/redo functionality
- Configuration settings file path was simplified
- Configuration settings file made available for user (to copy/paste/export/share)
- Previous user configuration settings can be used after upgrading to a new version
- Added an ability to send a message(s) without any delays, when the Rate field is set to "0"
- Improved “Edit message “ interface usability
...
New Features and Improvements
- FIX logs replay feature has been implemented
- An ability to autoincrement tags while sending has been implemented
- FIX Client Simulator persists the following data between program runs :
- Position and size of the main window.
- Names and parameters of all created sessions. Sessions can be restored in a connected or disconnected state.
- Edited message.
- Value for Autoincrement tags edit box.
- Values of Rate and Send Count controls for both Send Message and Replay tabs.
- Values for other controls from the Replay tab: Log file, Sequence numbers, Filter, Use timestamps and Speed.
- Values for checkboxes from the Events Viewer menu and Options menu.
...