Affinity mask settings

The Antenna allows users to change affinity masks for threads with different purposes. This allows the application to run functionality on a critical path at dedicated threads/CPU cores. It results in response time spreading reduction and helps to keep it minimal.

FIX Antenna C++ supports affinity masks up to 64 cores

FIX Antenna C++ threads:

• dedicated threads for session processing
  • SendCpuAffinity
  • RecvCpuAffinity
  • CpuAffinity
• threads pool dedicated to messages processing that is sharable between all sessions
  • WorkerCpuAffinity
• auxiliary antenna threads
  • HelperCpuAffinity
• Note: uncontrollable threads, e.g some timers

FIX Antenna C++ supports various affinity configuration formats: Decimal, Hexadecimal, Cores-set formats.

Affinity is specified as bitmask where a serial number of the bit is the serial number of the core.
The default value is 0. It means that the engine will not change the thread affinity mask.

Application properties

• mask for all worker pool threads

  WorkerCpuAffinity = 0

• mask for dispatcher and other auxiliary threads

  HelperCpuAffinity = 0

Session properties

• mask for dedicated sending thread of a session. It makes sense only for an aggressive send mode

  Session.Default.SendCpuAffinity = 0

• mask for the dedicated receiving thread of a session. It makes sense only for an aggressive receive mode

  Session.Default.RecvCpuAffinity = 0

• mask for dedicated threads of a session. It makes sense only for aggressive modes

  Session.Default.CpuAffinity = 0

Supported affinity formats

1. Decimal
   

   WorkerCpuAffinity = 31

   The setting above exposes cores #0,1,2,3,4
   (see Backward compatibility)
   
   

2. Hexadecimal 
   

   Introduced in FA C++ 2.27.1

   WorkerCpuAffinity = 0x1F3A 

   The setting above exposes cores #1,3,4,5,8,9,10,11,12
   
   

3. Cores-set format (like Linux' taskset command)
   

   Introduced in FA C++ 2.27.1

   # core numbers: integer values of set [0..63]
   Session.Default.RecvCpuAffinity = 2-4
   
   # separator character: ','
   HelperCpuAffinity = 1,4
   
   # grouping characters: '{' '}'
   WorkerCpuAffinity = {0}

   The settings above expose cores respectively #2,3,4;  #1,4; #0;
   

   NOTE: To avoid erroneous reading with the cores-set format, use a grouping of characters in case of single-core in the mask:

   WorkerCpuAffinity = 31 - it means cores #0,1,2,3,4

   WorkerCpuAffinity ={31} - it means cores #31

Support ranges

• Use comma-separated list instead of bitmask (decimal values in the range [0..63] separated by comma)

  Session.Default.RecvCpuAffinity = {1,3,4,5,8,9,10,11,12}

• Supports ranges (like Linux' taskset command) 

  Session.Default.RecvCpuAffinity = 1,3-5,8-12

• Supports initializing list brackets to separate sense groups 

  Session.Default.RecvCpuAffinity = {1,3-5,7},{12-15}

Backward compatibility

The new implementation does not affect the old version of the configuration.

The old Decimal and taskset-like formats have a different meaning of single number value.
For any conflicting cases please use curly brackets '{}' notation.

# The new settings uses core #2
WorkerCpuAffinity = 2
WorkerCpuAffinity = 0x2
WorkerCpuAffinity = {2}


# The old behavior uses cores # 1, 2, 3. Not using core #0
WorkerCpuAffinity = 14
# The old behavior uses cores #0
WorkerCpuAffinity = 1

# The new behavior uses cores #2 and #4
WorkerCpuAffinity = 0x14
# The new behavior uses core #14
WorkerCpuAffinity = {14}
# The new behavior uses core #2 and #4
WorkerCpuAffinity = {2,4}

# The old behavior means all cores for mapping (default) 
WorkerCpuAffinity = 0
# The new behavior uses core #0
WorkerCpuAffinity = {0}
# The new representation to map all cores:
WorkerCpuAffinity = {0-63}
WorkerCpuAffinity = 0xFFFFFFFFFFFFFFFF

Troubleshooting

The output format for affinity in logs and other outputs in decimal style:

• The correct Affinity value:

[INFO]  20200127-10:46:21.703 [13888] [Engine] - WorkerCpuAffinity = {1-3}
[INFO] 20200127-10:30:46.303 [11448] [Engine] - Session <ESVR, CTG> : New session created CpuAffinity = 0

• The incorrect value/range for Affinity value:

[ERROR] Affinity parse error at pos=1 : token value '2147483647' exceeds the range [0..63]
[ERROR] Affinity parse error at pos=1 : token can not be parsed as integer inp: {abc}

• The incorrect interval of Affinity value:

[ERROR] Affinity parse error at pos=0 : token is neither interval nor decimal value inp: 1.3,4/5

How to get information about threads

Example configuration engine.properties of FIX Antenna C++ application (e.g. EchoServer, SimpleClient samples)

WorkerCpuAffinity = {1}   #(it's Worker# in CPU)
HelperCpuAffinity = {1}    #(it's Dispetcher in CPU)

Check assigned CPU cores in Linux using htop:

$ htop -p `pidof EchoServer`

Check assigned CPU cores in Windows using Visual Studio

Thread names in FIX Antenna C++

Add the threads' names to application logs' records.

The thread name can be settled by  ‘%thread_name’ argument in Log.File.Format property in the engine.properties, e.g:

Log.File.Format = %date{ISO8601} %timezone   %level%tablevel   [%logger]  %thread_name %thread %message

FIX Engine parameters#Log.File.Format

2019-08-16 12:35:53,663 UTC INFO [Engine] Worker_0 31940 -- "Session <MYAPP, CLIENT> : Asynchronously connecting to 127.0.0.1:9106"

The List of FIX Antenna spawned threads

FIX Antenna adds 'FA: ' prefix to a thread name for Linux.

Using the top for viewing thread names

The threads names can be viewed using a command:

top -H 

How to change the thread name via FIX Antenna API

The thread name can be changed with a function:

static void System::Thread::setName ( char const * name );