Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 40 Next »

Overview

The settings in this section describe only FIXEdge parameters. These parameters don't belong to FIX sessions parameters or FIX Engine parameters

These settings of the FIXEdge are defined into 'FIXEdge.properties' configuration file.

TCP Protection parameters

This section describes properties in FIXEdge.properties file which are responsible for TCP protection.

ProtectionTCP.Enabled

The property enables TCP protection.

Valid values: true/false. Default value: ProtectionTCP.Enabled = false.

Example: ProtectionTCP.Enabled = true

ProtectionTCP.WaitLogon

The property to specify connection timeout (in milliseconds) of waiting for logon. When the time comes out, the connection is closed with corresponding reason:


[INFO]  20160706-07:40:53.032 [1274500] [Engine] - Logon message wasn't received in a given time interval(1000 ms) from 127.0.0.1:60376
[INFO]  20160706-07:40:53.032 [1274500] [Engine] - Incoming TCP connection was closed (from 127.0.0.1:60376).


Disable when equal to 0. Default value: ProtectionTCP.WaitLogon = 10000

Icon

The property will be enabled only if ProtectionTCP.Enabled = true

ProtectionTCP.SizeWaitHostMax

The property to specify maximum of connections waiting for logon from one host. When the number of connections from the same host exceeds specified value of the property, new connections will be rejected with corresponding reason. 


[INFO]  20160706-07:30:21.566 [1271868] [Engine] - Incoming TCP connection was rejected (from 127.0.0.1:60300). Excedeed limit of connections (5) from a single host.


Disable when equal to 0. Default value: ProtectionTCP.SizeWaitHostMax = 5

Icon

The property will be enabled only if ProtectionTCP.Enabled = true

ProtectionTCP.SizeBufferMax

Specifies the maximum size (in bytes) of the buffer to be able to avoid the situation when user sends high-loaded garbage. 

When the limit is exceeded, connection will be closed and corresponding reason will be written to the log.


[INFO] 20160706-07:21:19.809 [1271256] [Engine] - Incoming TCP connection was detected (from 127.0.0.1:60258).
[INFO] 20160706-07:21:19.965 [1271896] [Engine] - Exceeded buffer received limited(1000000 ) from 127.0.0.1:60258
[INFO] 20160706-07:21:19.966 [1271896] [Engine] - Incoming TCP connection was closed (from 127.0.0.1:60258).


Icon

When connection is re-established after closure, Client will send Logon message with MsgSeqNum = <last outgoing sequence number> + 1. As a result, FIXEdge will send ResendRequest and will receive the same message which caused disconnection. Thus, connection will be closed again.

The minimum size of the property which can be specified is 262144. If a lower value is specified in the property, it will be replaced with 262144 on the start of the FIXEdge.

If 0 is specified, there is no limit for the size of the buffer.

Default value: ProtectionTCP.SizeBufferMax = 0.

Icon

The property will be enabled only if ProtectionTCP.Enabled = true

For more information please read the article How to configure TCP protection in FIXEdge.

Transport Adaptors common parameters

The section contains fields which are common for all Transport Adaptors.

FIXEdge.AllowNGTStatusNotifications4TAClient

Valid values: true|false.

When the option is true, FIX Edge uses the latest Client's status in Status Notification message. When option is false, FIX Edge sends Client's status 'Terminated Correctly' in Status Notification message;

Default value is false.

TransportLayer.UnknownClientsAllowed

Valid values: true|false.

When the option is true, Transport Layer allows to call onLogout() callback for the TA Clients without onLogon() call. When the option is false, Transport Layer ignores onLogout() callbacks for the client that didn't call onLogon() before.

Default value is false.

TransportLayer.TransportAdapters.Path 

The parameter is an enumeration of transport adapters' directory names separated by ','

Default value is:

  • 'bin' for Windows
  • '?' for UNIX

This parameter is applicable since FIXEdge C++ version 6.14.0


Control Centre parameters

ControlCentre.XMLSockMonitor.Port 

XML Sock monitoring port to accept requests from the special tool FEAdminConsole.

Example: ControlCentre.XMLSockMonitor.Port = 8902

ControlCentre.Lock.File.Name

File that prevents from starting multiple FIXEdge instances at the same directory.

Example: ControlCentre.Lock.File.Name = FIXEdge1/log/_fixedge.lock

Starting several FIXEdge instances at the same directory will cause an error:

ERROR: Cannot create lock file '../FIXEdge1/log/_fixedge.lock'. Possibly another instance of the application is running using the same directory.

Settings of FIXICC Functionality Availability

FIXICC.Schedules

Optional. Defines if the new schedule management functionality should be available in FIXICC or not.

  • If FIXICC.Schedules = true, new schedule management functionality is available in FIXICC
  • If FIXICC.Schedules = false or FIXICC.Schedules is not specified, new schedule management functionality is not available in FIXICC.

Default value: false.

Monitoring Memory Usage

MemoryWatch.Limit

Optional. Enable this parameter to force engine to monitor RAM capacity occupied by FIXEdge.

Once value is reached and exceeded FIXEdge generates OnNotificationEvent to notify about exceeding the available memory.

Value set in Mb.

MemoryWatch.Interval

Optional. Frequency of checking occupied memory.

Value set in seconds.

Example
FIXEdge.MemoryWatch.Limit = 100
FIXEdge.MemoryWatch.Interval = 60

Described functionality is implemented in FIXEdge Windows version only.

Logging for lifecycle FIXEdge events

Since FIXEdge version 6.7.0 the following lifecycle events are supported:

NameDescription
AppStartingApplication is being to be started and log system is initialized
AppStartedProperties are loaded and sessions are runned
AppReadyAll components of application was started
AppFailedApplication is crashed
AppSigTermDetectedSignal SIGINT or SITERM is detected
AppShutdownApplication is being to shut down (stop sessions / destroy objects)
AppCompleteAll work is done, stopped as planned

The events are logged and FIXEdge can notify other system about events

Parameters for setting up logging of these events are described in this section.

Events can be forwared to ArcSight

See How to configure forwarding FIXEdge lifecycle events to ArcSight for more information

Log.Events.LogCategory

Mandatory. Default category for all events

Log.Events.LogLevel

Optional. Default log level for all events

Valid values: TRACE, DEBUG, INFO, ERROR, FATAL

Default value: INFO

Log.Events.Event.<NameOfEvent>

Optional. Defines the logging format (pattern).

if the parameter is not defined, the event logs will not be generated

Log.Events.Event.<NameOfEvent>.LogCategory

Optional. Log category for a single event

Default value: value of Log.Events.LogCategory parameter

Log.Events.Event.<NameOfEvent>.LogLevel

Optional. Log level for a single event

Valid values: TRACE, DEBUG, INFO, ERROR, FATAL

Default value: value of Log.Events.LogCategory parameter

  • No labels