# The FIX Engine configuration file.
#
# $Revision: FA 2.8 $
# For UNIX platforms, the filename-separator character is "/".
# For Win32 platforms, the filename-separator character is "\\" or "/".
#######################################################################
# Engine settings
#######################################################################
# The top of the directory tree under which the engine's configuration,
# and log files are kept.
...
# Engine's log file name.
# If this parameter is commented or empty, the 'engine.log' will be used. 
# LogFileName = FIXAntenna_C++.log
...
# Default storage type of the created unregistered sessions. By default persistent storage 
# type used. Use "transient" value to use transient storage for the sessions.
# UnregisteredAcceptor.SessionStorageType =
...
# This property is the path of the directory in which the logs for all incoming 
# (if LogIncomingMessages is set to "true") and outgoing FIX messages are stored. 
# It is possible to specify a path related to the EngineRoot directory. 
# For example if LogDirectory is set to \"logs\" then the real path is $(EngineRoot)/logs.
# The specified directory must exist.
LogDirectory = FIXOEGW1/log
# Relative path to the backup folder. This folder will be used for message storage files
# of the backup connections.
BackupDirectory = FIXOEGW1/log/backup
#######################################################################
# Session settings
#######################################################################
# This property provides an option to log incoming FIX messages (those received) from 
# a counterparty FIX Engine. They will be stored in the directory specified by 
# the LogDirectory parameter in a file with extension "in".
LogIncomingMessages = true
...
#######################################################################
# Validation
#######################################################################
...
#######################################################################
...
# An option to write timestamps in the log files. 
# This parameter is optional, the default value is true.
TimestampsInLogs = true
...
# Setting property "true" will reserve 10Mb of disc space for logging. 
# If log reaches 10Mbs, another 10Mbs will be reserved and so on.
# When property is "true" FixAntenna performance is greately increased.
EnableIncrementalLogFileCreation = false
# Setting property "true" will enable logging session parameters on creation.
Debug.LogSessionExtraParameters = true
#######################################################################
# Engine monitoring
#######################################################################
...
#######################################################################
# Engine measuring
#######################################################################
...
#######################################################################
# Logger settings
#######################################################################
# Default target devices
#
# Valid values:
#   * File - messages will be written to the file. 
#   * Console - messages will be written to the console. 
#   * EventLog (Windows specific) - messages will be written to the Windows Event Log. 
#   * WinDebug (Windows specific) - messages will be written to the OutputDebugString. 
#   * Syslog (Linux/Unix specific) - messages will be written to the system log.
#
# The properties of the device are in the "Log.<name>" section. For instance Log.File contains 
# all properties of the File device.
Log.Device = File
# Enable Debug messages. 
# Valid values:
#   * true - to enable Debug messages
#   * false - to disable Debug messages
Log.DebugIsOn = true
Log.TraceIsOn = true
# Enable Note messages. 
# Valid values:
#   * true - to enable Note messages
#   * false - to disable Note messages
Log.NoteIsOn = true
# Enable Warning messages. 
# Valid values:
#   * true - to enable Warning messages
#   * false - to disable Warning messages
Log.WarnIsOn = true
# Enable Error messages. 
# Valid values:
#   * true - to enable Error messages
#   * false - to disable Error messages
Log.ErrorIsOn = true
# Enable Fatal Error messages. 
# Valid values:
#   * true - to enable Fatal Error messages
#   * false - to disable Fatal Error messages
Log.FatalIsOn = true
# Enables/disables log file cycling
# Valid values:
#   * true - to enable cycling
#   * false - to disable cycling
Log.Cycling = false
#######################################################################
# Logger settings: File device
#######################################################################
# Timezone of the log message timestamp 
# Valid values:
#   * Local - display time as local
#   * UTC - display time as UTC
Log.File.TimeZone = UTC
# Root directory for log files. It will be concatenated with
# each file name specified by 'Log.File.Name'
Log.File.RootDir = ./logs
# File name. If more than one category uses files with the same name
# the same file will be used simultaniously.
Log.File.Name = _.log
# Separated log for 'Version' category
Log.Version.File.Name = version.log
# If set to true then lock file <Log.File.RootDir/Log.File.Name>.lock will be created. This
# will prevent other instance of the application use the same file.
#
# Valid values:
#   * true - lock log file
#   * false - do not lock log file
Log.File.Locked = false
# Enables/disables log file rotation
# Valid values:
#   * true - to enable rotation
#   * false - to disable rotation
Log.File.Rotate = false
# Local time when logs should ba backed up. Shoudl be in format 'hh:mm'
# or 'hh:mm:ss'.
# Optional.
Log.File.Backup.Time =
# If true then file will be recreated on each start.
# If false then new records will be appended to the existent file.
Log.File.Recreate = true
# If set to true then buffer will be flushed after each logging call. 
# If set to false then flush is not called.
#
# Setting to true decreases program performance; setting to false increases 
# a risk of records loss in case of program failure.
Log.File.AutoFlush = true
# String that specifies the name of the source. The source name must be a
# subkey of a logfile entry under the EventLog key in the registry. For
# example, "WinApp" is a valid source name if the registry has the following
# key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Event Log\Application\WinApp
Log.EventLog.EventSource = TestService
# Specifies amount of memory reserved for memory mapped file message storage for out/in file
# WARNING: Changing this value will impact upon the performance of FIX Engine. 
# Large value is better. 
Persistents.LogIncrementSize=1000000
# Specifies amount of memory reserved for memory mapped file message storage for idx file
# WARNING: Changing this value will impact upon the performance of FIX Engine. 
# Large value is better.
Persistents.IdxIncrementSize=10000

# The FIX Server configuration file.
#
# $Revision: 1.5.2.3 $
# The top of the directory tree under which the FIXEdge's configuration,
# and log files are kept.
#------------------------------------------------------------
# Control Centre Section
#------------------------------------------------------------
...
#------------------------------------------------------------
# Business Layer Section
#------------------------------------------------------------
...
#------------------------------------------------------------
# FIX Layer Section
#------------------------------------------------------------
# This parameter determines the names of FIX session-acceptors. For each
# such a session it is necessary to define the parameters described below.
# The format is 'session.X.ParameterName' where 'X' is the name of session.
FixLayer.FixEngine.Sessions = FIXEDGE-CONTROL, TEST001, ...
# Path to move log files after the appointed session was closed.
# Warning: directory must exist otherwise the backup procedure will fail.
# Note: Optional.
FixLayer.FixEngine.Sessions.ArchivePath = /log/FIXEdge1/logs/archive
...
#------------------------------------------------------------
# Test FIX 4.4 sessions
#------------------------------------------------------------
FixLayer.FixEngine.Session.TEST001.Version = FIX44
FixLayer.FixEngine.Session.TEST001.StorageType = persistentMM
...
#------------------------------------------------------------
# Transport Layer Section
#------------------------------------------------------------
...
#------------------------------------------------------------
# The SMTP Adaptor configuration file.
#------------------------------------------------------------
...
#------------------------------------------------------------
# Default log settings section
#------------------------------------------------------------
# Target directory.
# Please specify absolute directory path for NT Service application.
Log.File.RootDir = /log/FIXEdge1/logs
# Target devices
Log.Device = File
# Turns on/off logging on the debug level
Log.DebugIsOn = false
# Turns on/off logging on the trace level
Log.TraceIsOn = false
# Turns on/off logging on the notice level
Log.NoteIsOn = true
# Turns on/off logging on the warning level
Log.WarnIsOn = true
# Turns on/off logging on the error level
Log.ErrorIsOn = true
# Turns on/off logging on the fatal level
Log.FatalIsOn = true
# Turns cycling on/off.
Log.Cycling = false
# Number of repeating records to be placed to log before cycling is started.
Log.Cycling.Ignore = 3
# Number of repeating records to be accumulated (hidden) before write the
# "cycle record" to the log.
Log.Cycling.BlockSize = 10
# Multiplier for the Block Size. If BlockSize number of messages is 
# accumulated and the same message still appears then next BlockSize
# is calculated as the previous one multiplied by Multiplier.
Log.Cycling.Multiplier = 10
# File name. If more than one category uses files with the same name
# the same file will be used simultaneously.
Log.File.Name = FixEdge.log
# Separated log for 'Version' category. Not required
Log.Version.File.Name = version.log
# Separated log for level 'Trace' in 'CCAdminApplication' category. Not required.
Log.CCAdminApplication.Trace.File.Name = FixEdge_CCAdminApplication_Trace.log
Log.CCAdminApplication.TraceIsOn = false

# Custom format of log file record.
# Can be defined separately for each log file e.g. Log.Version.File.Format = ...
# Format string can contain any symbols and keywords:
# %%             - put '%' symbol
# %level         - put severity level name: 'ERROR', 'WARN' etc.
# %tablevel      - put extra spaces for vertical alignment of records after %level
# %date{FIX}     - date in 'YYYYMMDD-HH:MM:SS.sss' format
# %date{ISO8601} - date in 'YYYY-MM-DD HH:MM:SS,sss' format
# %date          - date in 'DD MMM YYYY HH:MM:SS,sss' format
# %timezone      - time zone abbreviation or name (setup TZ env variable to take abbreviation in windows) or 'UTC'
# %logger        - log category, component
# %thread        - thread id
# %message       - logged message
Log.File.Format = %date{ISO8601} %timezone   %level%tablevel   [%logger]  %thread  %message
#Log.File.Format = [%level] %tablevel%date{FIX} [%thread] [%logger] - %message
# Timezone of the log message timestamp 
# Valid values:
#   * Local - display time as local
#   * UTC - display time as UTC
Log.File.TimeZone = UTC
# If true then file will be recreated on each start.
# If false then new records will be appended to the existent file.
Log.File.Recreate = false
# If set to true then buffer will be flushed after each logging call. 
# If set to false then flush is not called.
# Setting to true decreases program performance; setting to false increases 
# a risk of records loss in case of program failure.
Log.File.AutoFlush = true
# Enables rotation in the logs when size limit is reached
Log.File.Rotate = true
# Size of file in bytes. When log file reaches this size it is renamed 
# (follow standard rotation approach) and the new file is created
Log.File.Rotate.SizeLimit = 104857600
# Number of files to be involved in rotation. When the number is exceeded 
# the older file is removed
Log.File.Rotate.FileLimit = 0
# Rotation directory. Directory to store rotated files.
Log.File.Rotate.Dir = /log/FIXEdge1/logs