The user can also assign another name for the configuration file, such as the Engine::FixEngine::init(const std::string& aPropertiesFileName = "") call parameter.

For example:

Engine::FixEngine::init("FE.properties")

EngineRoot

The top of the directory tree under which the Engine's configuration and log files are kept.

DO NOT add a slash at the end of the directory path.

ListenPort

Optional. Port or several ports, delimited by a comma, on which acceptors listen to FIX sessions' incoming connections. 

One incoming port can be used for several sessions. 

The parameter is ignored for the entire application if a listen port is set for a specific session. In this case, another ListenPort parameter (on session level) is used by FIX Engine. 

If the listen port is not set either globally, or for a specific session, FIX Engine will not accept connections. 

LogFileName

Optional. Engine's log file name. If this parameter is commented or empty, LogFileName = "engine.log" as default.

Actually represents the alias for the "Log.Engine.File.Name" parameter. If both parameters are specified simultaneously, then:

• If Log.Engine.Device is not specified, "LogFileName" is used;
• If Log.Engine.Device is specified, "Log.Engine.File.Name" is used;

IncludeProperties

Optional. This parameter defines the list of paths to the auxiliary properties files to be included in the engine.properties file. FIX Antenna C++ also provides the ability to include auxiliary properties files recursively.

Example: IncludeProperties = Engine/conf/engine.properties1

ListenAddress

Optional. The local IP address of the network interface accepting incoming connections.

Default value: 0.0.0.0 - listens to connections at all network interfaces.

LicenseFile

The license file path.

LogDirectory

This property is the path of the directory in which the logs for all incoming (if LogIncomingMessages is set to "true") and outgoing FIX messages are stored.

It is possible to specify a path related to the EngineRoot directory. For example, if LogDirectory is set to "logs", then the real path is /logs. The specified directory must exist.

NumberOfWorkers

A number of threads that serve FIX sessions (heartbeat generation/check, message rejecting, message delay delivering, etc.).

The recommended value is 10. The value must be an integer greater than zero.

OutOfSequenceMessagesStrategy

Optional. This parameter sets a strategy for processing out-of-sequence messages. The details about the strategies can be found here: How to set strategy for processing out-of-sequence messages

Valid values:

• RequestAlways - send resend request with BeginSeqNo (7) = <out-of-sequence message number>, EndSeqNo (16) =0 on any out-of-sequence message
• RequestOnce - send the only resend request on the gap. Duplicates of resend requests for the same interval are not sent
• IgnoreGap - send resend request on gap and process out-of-sequence messages
• Queue - use a temporary queue for storing out-of-sequence messages and process them after the gap is closed

Default value: RequestAlways

OutOfSequenceMessagesStrategy.QueueSize

Optional. The size of the temporary queue for processing out-of-sequence messages (measured in a count of messages). The parameter is used if parameter OutOfSequenceMessagesStrategy=Queue.

Default value: 2000

A queue should be cleared after exceeding the limit of out-of-sequence messages and a new resend request should be sent.

The details about the strategies can be found here: How to set strategy for processing out-of-sequence messages

DictionariesFilesList

This parameter contains a list of names of XML files with extensions of the FIX protocols delimited by semicolon.

AdditionalParsersList

This parameter defines the list of additional (custom) protocols which require registering the corresponding parsers.

When FIX Antenna is started, all dictionaries from DictionariesFilesList are loaded. If dictionaries are standard, predefined standard parsers (like FIX40; FIX41; FIX42; FIX43; FIX44; FIXT11) are created based on them. If any dictionary from DictionariesFilesList is custom, the parser is not automatically created and therefore such parsers should be listed in the AdditionalParsersList parameter.

Format of the value: [UNIQUE_PARSER_NAME@][FIXT_PROTOCOL1:]APP_PROTOCOL1[,APP_PROTOCOL2...], where:

• UNIQUE_PARSER_NAME - optional, name of the parser;
• FIXT_PROTOCOL1 - optional, session protocol. Required if APP_PROTOCOL doesn't contain session messages;
• APP_PROTOCOL1 - required, application protocol;
• APP_PROTOCOL2, ... - optional, list of other application protocols.

Below are examples of possible parsers with the correct format:

• MyFixParser@FIXT11:FIX50SP2,FIX50SP1;
• FIXT11:FIX50SP2,FIX50SP1;
• FIXT11:FIX50SP2;
• FIX44.

Example: AdditionalParsersList = FIX44; FIXT11:FIX50SP2;  FIXT11:FIX50SP2, FIX50SP1; MyFixParser@FIXT11:FIX50SP2,FIX50SP1

MaximumParsersAllowed

Optional. This parameter defines the maximum amount of parsers allowed.

Valid values: An integer greater or equal to 100

Default value: 100

Example: MaximumParsersAllowed = 200

CheckVersionOfOutgoingMessages

This parameter is an option whereby the version of the FIX protocol used for the outgoing message is validated against that of the established session.

If set to 'true', then the application must use the same version of the protocol as the established session otherwise occurs the error may be seen on the BL (in the case of configured Managed Queue - in the log file). If set to 'false' then the application-level message will be sent to the counterparty.

The recommended value is 'true'.

Debug.LogSessionExtraParameter

If this property value is true, all session parameters will be printed to the application log file.

BackupDirectory

Relative path to the backup folder.

This folder will be used for message storage files of the backup connections.

Session parameters

To configure a session parameter for a session defined by SenderCompId (49) and TargetCompId (56) the following line should be added to the engine.properties file:

Session.<SenderCompID>/<TargetCompID>.<Parameter> = <value> 

To configure the default session parameter the following line should be added to the engine.properties file:

Session.Default.<Parameter> = <value>

LogonTimeFrame

This parameter sets the time period after which a session is non-gracefully terminated if a response is not received to a first "Logon" message (message type A).

The corresponding Logout message is sent to the counterparty. This value is in seconds. The recommended value is 30 seconds for dedicated connections or private networks. Trading connections via the internet will require calibration. If it is set to "0", then the time period is unlimited. The value must be an integer and not negative.

LogoutTimeFrame

This parameter sets the time period after which a session is automatically terminated if a response is not received to a "Logout message" (message type 5).

This value is in seconds. The recommended value is 10 seconds for dedicated connections or private networks. Trading connections via the internet will require calibration. The value must be an integer greater than 0.

IntradayLogoutTolerance

An option to not reset sequence numbers after Logout.

Valid values:

• true - enables IntradayLogoutTolerance mode
• false - disables IntradayLogoutTolerance mode

If set to true, sequence numbers are not reset after Logout. Logout sender should initiate session recovery by sending Logon message with SeqNum = <last outgoing="" seqnum>=""> + 1; expecting reply Logon with SeqNum = <last incoming="" seqnum>=""> + 1. If a gap is detected, a standard message recovery or gap-filling process takes place.

If set to false, sequence numbers are reset after Logout.

ReasonableTransmissionTime

This parameter specifies the delta (increment) to the Heartbeat interval between a TestRequest message being sent by FIX Engine and a Response Heartbeat being received.

The session attains a "telecommunication failed state" if no Response Heartbeat message is received after the normal Heartbeat interval plus delta. For example, if no message (application or session level) is received during the Heartbeat interval, the engine sends the TestRequest message. If the required Response Heartbeat message is not received during the Heartbeat interval plus Delta, then the session moves to the "Telecommunication link failed" state. This parameter is specified in (Heartbeat Interval/100).

The recommended value is 20%.

ForceSeqNumReset

This parameter controls the ResetSeqNumFlag (141) flag in the Logon (A) messages and allows resolving sequence gaps.

When the mode is ON, the session uses the ResetSeqNumFlag (141) tag in sending/confirming the Logon message and reset sequence numbers for an initiator or an acceptor.

Valid values:

• "0" or "false" - Disable ForceSeqNumReset mode. Do not reset sequence numbers on Logon
• "1" or "true" - Reset sequences at the first session initiation
• "2" - Reset sequences for every Logon

DuplicateResendRequestLimit

This parameter specifies the number of duplicate resend request messages (35=2) that can be received before the Application::OnResendRequestLoop callback is called. This gives the user the option to respond to identical resend requests only once and ignore all other duplicates.

Default value: 2

The following conditions cause the FIX Engine to consider resend requests as duplicates:

• The batch of messages that is to be resent, specified by the interval determined by the tags BeginSeqNo (7) & EndSeqNo (16), is the same
• Resend requests are received while the FIX engine is processing other resend requests

The FIX Standard Protocol recommends responding to every resend request received, which can make engine behavior unstable and lead to unexpected traffic growth.

Responding to every resend request is not the recommended behavior for FIX Antenna C++ products because doing so may lead to an infinite resend loop when one of the counterparties can’t process a batch of messages properly and initiates a resend request for the same batch of messages again and again. By reducing the volume of outgoing messages and duplicate responses, traffic is minimized and applications on both sides are made more stable.

ThirdPartyRoutingIsEnabled

FIX Engine has inbuilt FIX message routing capability and fully supports the "Deliver To On Behalf Of" mechanism as specified by the FIX protocol.

If this parameter is set to "true", the Engine redirects FIX messages automatically to other FIX sessions it maintains if the OnBehalfOfCompID field in the message is defined. If this parameter is set to "false", Engine directs all messages received to the client application.

DelayedProcessing.DeliveryTriesInterval

This parameter specifies the time interval between attempts to deliver an application-level message to a registered client application in the event the application does not confirm receipt and operation upon the message.

The value is specified in milliseconds. The value must be an integer greater than 0. This parameter is required only if the DelayedProcessing.MaxDeliveryTries parameter is specified.

DelayedProcessing.MaxDeliveryTries

Optional. This parameter specifies the number of attempts that will be made to deliver an application-level message to the registered client application.

If this value is exceeded then the session will be closed with the logout reason "Application not available".

The recommended value is 10. The value must be an integer and not negative.

Reconnect.Interval

This parameter specifies the time interval between reconnection attempts in order to restore a communications link.

This value is specified in milliseconds (seconds*10-3).

The recommended value is 1000 for dedicated connections and private networks. Internet connections require calibration. The value must be an integer greater than 0.

Reconnect.MaxTries

This parameter specifies the number of attempts to restore the session.

The session is considered as restored if the telecommunication link was restored and the exchange of Logon messages was successful. If it is set to "-1", then the number of attempts is unlimited.

This value is an integer.

MessageTimeToLive

Optional. This parameter sets the time period after which a message rejecting is started while the session doesn't exist.

Value is specified in milliseconds (seconds*10-3), and must be an integer greater than 0.

ResendMessagesBlockSize

Resend Request resend messages by blocks.

This parameter defines how many messages proceed in the block. The value “0” means that all messages will be resent in one block. The value must be an integer and not less than 0.

Default value: 1000

ResetSeqNumAfter24hours

Optional. An option to send a Logon message with the ResetSeqNumFlag set after each 24-hour period of the session's activity to establish a new set of sequence numbers (starting with 1).

Default value: false

EncryptionConfigFile

Encryption config file name.

TotalOutgoingStorageMemoryLimit

Specifies the total amount of memory (in MB) that the active session may use.

0 - means infinite. When the limit is reached, the "hardest" sessions will be closed non-gracefully.

OutOfSequenceMessagesStrategy

Optional. This parameter sets a strategy for processing out-of-sequence messages for a specific session.

Valid values:

• RequestAlways - send resend request with BeginSeqNo (7) = <out-of-sequence message number>, EndSeqNo (16) =0 on any out-of-sequence message. ResendRequestBlockSize is not supported (will be used strategy RequestOnce).
• RequestOnce - send resend request on gap (considering  ResendRequestBlockSize parameter). Duplicates of resend requests for the same interval are not sent.
• IgnoreGap - send resend request on gap and process out-of-sequence messages.
• Queue - use a temporary queue for storing out-of-sequence messages and process them after the gap is closed. 

Default value: Engine parameter OutOfSequenceMessagesStrategy

DeliverAppMessagesOutOfOrder

SuppressDoubleResendRequest

OutOfSequenceMessagesStrategy.QueueSize

Optional. The size of the temporary queue for processing out-of-sequence messages (measured in a count of messages). The parameter is used if parameter OutOfSequenceMessagesStrategy=Queue.

Default value: Engine parameter OutOfSequenceMessagesStrategy.QueueSize

A queue should be cleared after exceeding the limit of out-of-sequence messages and a new resend request should be sent.

SocketOpPriority

The mode of how FIX Engine performs the socket Send/Receive operations.

Valid values:

• EVEN (default) - FIX Engine uses the thread pool and share a worker thread among all session with this SocketOpPriority=EVEN
• AGGRESSIVE_SEND - FIX Engine uses a dedicated thread for a session that sends outgoing messages in exceptional cases (if it would block). By default, the current thread is used
• AGGRESSIVE_SEND_ASYNC - FIX Engine uses a dedicated thread for a session that sends all outgoing messages to the queue without trying to send them to the socket first. This mode aims to reduce the time spent on the execution of the session:put method and reduce the impact of slow consumers on the application by parallelizing the socket operations by default. 
• AGGRESSIVE_RECEIVE - FIX Engine uses a dedicated thread for a session that receives incoming messages. The engine constantly polls the data from the socket for achieving the minimum latency (See AggressiveReceiveDelay)
• AGGRESSIVE_SEND_AND_RECEIVE - FIX Engine uses two dedicated threads per session. One for receiving and another for sending messages in exceptional cases (if it would block).

• DIRECT_SEND - FIX Engine uses the current thread for sending if this would block, performs as "EVEN".

  DIRECT_SEND mode is available since FIX Antenna 2.23.0 release.

  AGGRESSIVE_SEND_ASYNC is available since FIX Antenna 2.30.0 release.

AggressiveReceiveDelay

Optional. Defines a polling interval in microseconds for reading data from the socket.

Works only with aggressive sessions i.e. AGGRESSIVE_RECEIVE or AGGRESSIVE_SEND_AND_RECEIVE modes. Setting a lower value reduces the latency but causes high CPU utilization.

Default value: AggressiveReceiveDelay = 500

AggressiveAsyncSpinWaitTimeUs

Optional. Defines the amount of time during which the message must be sent in the AGGRESSIVE_SEND_ASYNC mode.

Valid values: An integer greater or equal to 0

Default value: AgressiveAsyncSpinWaitTimeUs = 1000

OutgoingQueueBlockSize

Optional. Defines the size of the memory pool block for the outgoing messages queue. Applicable for the following values of the SocketOpPriority: AGGRESSIVE_SEND, AGGRESSIVE_SEND_ASYNC, AGGRESSIVE_SEND_AND_RECEIVE.

Valid values: An integer greater than 0.

Default value: OutgoingQueueBlockSize = 4096

OutgoingQueueSize

Optional. Defines the amount of memory pool blocks for the outgoing messages queue. Applicable for the following values of the SocketOpPriority: AGGRESSIVE_SEND, AGGRESSIVE_SEND_ASYNC, AGGRESSIVE_SEND_AND_RECEIVE.

Valid values: An integer greater than 0.

Default value: OutgoingQueueSize = 15

Optional. Specifies a defined schedule for the session.

There is no defined schedule by default. See details in the Programmer's Guide. 

SSL

For Initiator FIX Session:

Mandatory if SSL is used. Enable SSL support for the session.


Default value: false

For Acceptor FIX Session:

Optional. If true, accept SSL connection only. If false, accept both SSL and non-SSL connections for the session.


Default value: false

ParserVersion

Name of unique parser for FIX protocol. It is an identification of the FIX dictionary used for the session, i.e. the value of the 'id' parameter or in the case of QuickFIX dictionary it's a filename.

Valid values:

• FIX40

• FIX41

• FIX42

• FIX43

• FIX44,

• FIXT11@FIX50

• FIXT11@FIX50SP1

• FIXT11@FIX50SP2

• <user's transport version>@<user's protocol version>

Role

Role of the session.

Possible values:

• Initiator
• Acceptor

Host

The destination host for the initiator session.

Port

TCP port for connection to the remote site.

ListenPort

Port dedicated for a session.

For acceptors, it is a port that listens to incoming connections for a specified session.

The Engine stops accepting connections to the given port when the session is no longer used, i.e. terminated. For example, the session is terminated according to the schedule.

ListenAddress

The local IP address of the network interface accepting a specified session. 

Default value: 0.0.0.0 - listens to connections on all network interfaces.

SourceIPAddress

The expected IP address of a remote counterparty. Incoming connections from other endpoints will be filtered out.

If the real value is not equal to the expected one, then the connections are dropped without sending a message and the error condition is generated in the log output.

The parameter supports masks. For example: 10.96.0.0/11

Default value:  0.0.0.0 - accepts all connections from IP addresses on every network interface.

HBI

The heartbeat interval is in seconds for the initiator session.

CustomLogonMessageFileName

Optional. This property defines the path to the file with a custom Logon message for the initiator.

Default value: empty

TagsDelimiter

The character is used as a tag delimiter in a FIX message. Refer to How to use a custom symbol instead of SOH.

Default value: '0x01' (SOH)

ResetSeqNumFromFirstLogon

This parameter provides the ability to reset a session’s sequence numbers to the ones received in the Logon message in the case where session sequence numbers seem outdated.

The following fields control the frequency with which the sequence numbers are reset:

• ‘never’ – sequence numbers do not reset at logon
• ‘schedule’ – sequence numbers reset according to an existing schedule defined by the schedule parameter of the session, initiated by a first-time logon message
• cron expression – sequence numbers reset according to a customizable date and time, initiated by a first-time logon message

Default value: never

This parameter can be added via the engine.properties file for the acceptor session or set it via API.

ResetSeqNumOnNonGracefulTermination

This parameter provides the option, upon a session’s non-graceful termination, to reset sequence numbers. To use this functionality, set it to ‘true’.  Then, following non-graceful termination, ingoing and outgoing sequence numbers will be reset to 1.

Default value: false

If the parameter is set to ‘false’, incoming and outgoing sequence numbers will not be reset following non-graceful termination.

This parameter can be added via the engine.properties file for the acceptor session or set it via API.

ConnectPort

An outbound port is used to connect to the counter-party. The parameter applies only if the parameter ConnectAddress is specified, for using a port and any network interface ConnectAddress should be set to 0.0.0.0.

Optional. The default value is 0 letting the operating system decide what outbound port will be used.

The value of this parameter can't be equal to the value of ListenPort because this port is already occupied by the system.

CustomRawDataTagStrategies

CustomRawDataTagStrategies.<N>.Encoding

CustomRawDataTagStrategies.<N>.Strategy

CustomRawDataTagStrategies.<N>.Tag

CustomRawDataTagStrategies.Count

CustomSessionType

Specifies a type of session type with specific encryption or authentication rules.

• GENERIC - default FIX session
• LME_SELECT- encrypts password tag each time
• TOTAL_SSN_TYPES - Represents a number of sessions types
• CME_SECURE_LOGON - use CME Globex API Secure Logon scheme
  details can be found here How to connect to CME Globex using Secure Logon

Default value: GENERIC

FixKey

Mandatory if CustomSessionType = LME_SELECT.

Specifies a FIX key for LME sessions.

CMESecureKeysFile

Mandatory if CustomSessionType = CME_SECURE_LOGON.

Specifies a path to CME key files used for CME secure logon.

EnableCyclicSwitchBackupConnection

Defines if there should be an auto switch to the primary connection in case a backup connection is used and it erupted.

When set to 'true', a connection will be switched from primary to backup and back until the connection will be established.

Default value: false

EnableAutoSwitchToBackupConnection

Defines if there should be an auto switch to the backup connection in case the primary connection is used and it is interrupted.

Valid values:

• true - to enable EnableAutoSwitchToBackupConnection mode;
• false - to disable EnableAutoSwitchToBackupConnection mode.

DisableTCPBuffer

When set to 'true', the TCP buffer (Nagle algorithm) will be disabled for a session.

Default value: false

EnableFastScp

EnableMessageRejecting

When set to 'true', the session rejects application messages when the session is unable to send them during a specified period or was disconnected.

Default value: false

EncryptMethod

FASTCodecParameters.BoolNtoString

FASTCodecParameters.BoolYtoString

ForcedReconnect

When set to 'true' the session will try to reconnect when:

1. In the WaitForConfirmLogon state, when the session received an unconfirmed logon

2. In the WaitForConfirmLogon state, when the logon frame has expired

3. In Reconnect state, when the session was closed.

Default value: false

GenerateCheckSum

If set to 'false', the session will not calculate CRC for outgoing messages.

Default value: true

HandleSeqNumAtLogon

HiddenLogonCredentials

Masks password in in/out log files

Default value: false

IgnoreSeqNumTooLowAtLogon

When set to 'true', the session ignores 'SeqNum too low' at an incoming Logon message and continues with the received SeqNum.

Default value: false

IntradayLogoutToleranceMode

If set to 'false' FIX Engine ends the trading day for the session after Logout (5) from the counterparty and the session becomes correctly terminated. A sequence number reset is expected after receiving the logout.

If set to 'true' FIX Engine will be able to re-establish the session multiple times and treats every disconnection as an unexpected switching session to a NON-GRACEFULLY TERMINATED state. This option is recommended if multiple reconnections are expected during the trading session.

Default value: false

InvalidLogonStrategy

Optional. This property defines how Acceptor and Initiator respond to invalid Logon messages. The parameter may be configured on the default session level.

Valid values:

• RejectAndLogout (send both Reject (35=3) and Logout (35=5) messages)
• Logout (send only a Logout (35=5) message).

Default value: Logout

IsForwardingFixMessagesToLog

KeepConnectionState

Optional. This property defines whether primary to backup (and vice versa) connection switching continues using existing messages storage.

Valid values: 'true' | 'false'

Default value: true

LogDirectory

Optional. Defines the path to the directory in which logs of the primary connection of the session are stored.

If this property is not specified with value then the value of the LogDirectory will be used.

LogonMessageSessionQualifierTag

Defines the tag of the field to be used by FIX Engine when dispatching an incoming connection.


SessionQualifier is passed in this field. SenderCompID(49), TargetCompID(56), and this field are used for searching for the appropriated acceptor among existing registered acceptors. The field is optional if the application doesn't intend to accept an incoming connection.


See also SessionId and SessionQualifier Notes 

MaskedTags

Optional. This parameter contains a list of sensitive tags whose values should be masked in the log files (for example, Username and Password). These tag values in in/out log files for the messages of A, BE, BF, n types will be replaced with ***. 

Example: FixLayer.FixEngine.Session.TestFIXAcceptor.MaskedTags = 554,553.

The message will be written to the log file in the following way: 8=FIX.4.4^9=85^35=A^49=a_t1^56=a_s1^34=1^52=20161005-17:29:14.339^98=0^108=10^141=Y^553=***^554=***^10=176^

Masks are also applied to User Modification messages (MsgType = CB).

MaxMessagesAmountInBunch

Enqueued outgoing messages could be merged and sent as a single batch with the size specified by this parameter.

Default value: 0 (means infinite amount).

MessagesStorageSize

This parameter specifies in-memory messages storage size.

Default value: 20000.

Password

The user's password for the session.

• For initiator: The value of this field will be transferred to the acceptor in the Password (Tag 554) field of the Logon(A) message;

• For acceptor: The value of this field will be compared to the value of the Password (Tag 554) field of the incoming Logon(A) message. If values are not equal, Logon will be rejected.

FIX Antenna C++ provides the ability to export the Password value from the vault using a script. This can be achieved by defining the Password property in the engine.properties file in the following format:

• Session.Session_Name.Password = script://@[timeout=<value>, trim]<path_to_script>

Where

• timeout - is an optional attribute that defines the time interval to wait for successful script execution. If this attribute is not defined, then 5 sec will be used by default.
• trim - is an optional attribute that defines whether the value returned by the script should be trimmed. If this attribute is present, then the line break symbol will be deleted from the Password value received from the vault.
• path to script - is a path to the script that will be used to get the Password from the vault. If the path is relative, it must be relative to the current working directory.

PasswordTag

Specifies a tag used to store a password

ReconnectInterval

This parameter specifies the time interval between reconnection attempts in order to restore a communications link.


This value is specified in milliseconds. The recommended value is 1000 for dedicated connections and private networks. Internet connections may require calibration.

The value must be an integer greater than 0.

Default value: 1000.

ReconnectMaxTries

This parameter specifies the number of attempts to restore the session.

The session is considered as restored if the telecommunication link was restored and the exchange of Logon messages was successful. If it is set to "-1", then the number of attempts is unlimited.

Default value: 3

ResendRequestBlockSize

Defines the number of messages requested using Resend Request messages.

If the message sequence gap is larger than SessionExtraParameters::resendRequestBlockSize_, Session will split resend requests by blocks of SessionExtraParameters::resendRequestBlockSize_ size.

Default value: -1

SenderLocationID

SenderLocationID (142) assigned value used to identify specific message originator's location (i.e. geographic location and/or desk, trader).

The property is ignored if it is not specified.

SenderSubID

SenderSubID (50) assigned value used to identify specific message originator (desk, trader, etc.).

The property is ignored if it is not specified.

SendingTimestampUnit

Defines the precision of the timestamp to be specified in tags SendingTime (52) and OrigSendingTime (122) in the outgoing message.

Valid values:

• second
• millisecond
• microsecond
• nanosecond

Default values:

• For FIX 4.0 и FIX 4.1:
  • if KeepMillisecondsInUTCTimeFields = 0, then tags SendingTime (52) and OrigSendingTime (122) precision is seconds
  • if KeepMillisecondsInUTCTimeFields = 1, then SendingTime (52) has seconds precision and OrigSendingTime (122) has milliseconds precision
  • if KeepMillisecondsInUTCTimeFields = 2, then tags SendingTime (52) and OrigSendingTime (122) precision is seconds
• Millisecond for all other FIX versions.

SendLastMsgSeqNumProcessed

SocketBusyPollTime

SocketRecvBufSize

Socket incoming buffer size.

Default value: -1 (unlimited)

SocketSendBufSize

Socket outgoing buffer size.

Default value: -1 (unlimited).

SocketTcpMaxSeg

StorageRecoveryStrategy

StorageType

Message storage type

Valid values:

• persistent - save messages to the disk
• persistentMM  - save messages to the disk using memory-mapped files
• splitPersistent - save messages to the disk and limit maximum storage size
• transient - keep messages in memory
• null - do not keep the session state at all

Default value: persistentMM

TargetLocationID

TargetLocationID (143) assigned value used to identify specific message destination's location (i.e. geographic location and/or desk, trader).

The property is ignored if it is not specified.

TargetSubID

TargetSubID (57) assigned value used to identify a specific individual or unit intended to receive the message.

'ADMIN' is reserved for administrative messages not intended for a specific user.

The property is ignored if it is not specified.

Transport

Low-level transport of the session.

Valid values:

• SOCKETS - Kernel sockets
• MYRICOM_DBL - Myricom DBL sockets

Default value: SOCKETS

UseAsyncConnect

When set to 'true', the session initiator will use async TCP connect.

Default value: false

UseBlockingSockets

If set to 'true', the session will use blocking I/O.
This mode is useful for OpenOnload and is enabled if the aggressive mode is ON. AggressiveReceiveDelay or Engine::SessionExtraParameters::aggressiveReceiveDelay_ are used as a timeout parameter.
See also:

• SocketOpPriority
• AggressiveReceiveDelay

Default value: false 

Username

User name for the session.

• For initiator: The value of this field will be transferred to the acceptor in the Username (Tag 553) field of the Logon(A) message;

• For acceptor: The value of this field will be compared to the value of the Username (Tag 553) field of the incoming Logon(A) message. If values are not equal, Logon will be rejected.

FIX Antenna C++ provides the ability to export the Username value from the vault using a script. This can be achieved by defining the Username property in the engine.properties file in the following format:

• Session.Session_Name.Username = script://@[timeout=<value>, trim]<path_to_script>

Where

• timeout - is an optional attribute that defines the time interval to wait for successful script execution. If this attribute is not defined, then 5 sec will be used by default.
• trim - is an optional attribute that defines whether the value returned by the script should be trimmed. If this attribute is present, then the line break symbol will be deleted from the Username value received from the vault.
• path to script - is a path to the script that will be used to get the Username from the vault. If the path is relative, it must be relative to the current working directory.

UsernameTag

Specifies a tag used to store a username

Storages

LogIncomingMessages

This property provides an option to log incoming FIX messages (those received) from a counterparty FIX Engine.

They will be stored in the directory specified by the LogDirectory parameter in a file with the extension "*.in".

OutgoingMessagesStorageSize

This parameter defines the upper limit to the number of outgoing messages that are resent in the event of a Resend Request.

The recommended value is 20000 if no data on mean activity is known.

ExtraSafeMode

If this parameter is set to 'true' then file streams are flushed after each I/O operation.

TimestampsInLogs

Optional. An option to write timestamps in the log files.

Default value: true.

EnableIncrementalLogFileCreation

Setting the property "true" will reserve 10MB of disc space for logging.

If the log reaches 10Mbs, another 10Mbs will be reserved, and so on. When a property is set to 'true' FixAntenna performance is greatly increased.

Persistents.LogIncrementSize

Specifies the amount of memory in bytes reserved for memory-mapped file message storage for *.out/*.in files.

It defines how FIX Antenna reserves space on the HDD for PersistentMM (in any cases) and Persistent (if EnableIncrementalLogFileCreation is ON). It is recommended to set a large enough value to minimize the number of resizes during the storage lifetime. Each resize can cause a latency spike.

Persistents.IdxIncrementSize

Specifies the amount of memory in bytes reserved for memory-mapped file message storage for *.idx file It defines how FIX Antenna reserves space on the HDD for PersistentMM (in any cases) and Persistent (if EnableIncrementalLogFileCreation is ON).

It is recommended to set a large enough value to minimize the number of resizes during the storage lifetime. Each resize can cause a latency spike.

Persistents.MinDiskSpace

This property specifies the minimal disk space in Mb available on the session's logs device in order to start the session.

Default value: 50

SplitPersistentMsgStorage.BackupDir

This property is the path to the directory, where sliced message storage will search for log files in case they are not found in the primary location.

It is the user's responsibility to move files from the primary location to the backup.

Default value: empty - backup path disabled

SplitPersistentMsgStorage.MaxSliceSize

Specifies the maximum size of one slice for sliced message storage.

Recommended value: any multiple of Persistents.LogIncrementSize.

Default value: 500000000 - 500Mb

MessageStorage.IndexRebuildEnabled

Optional. If this parameter is set to 'true', FIX Engine will try to restore the index file from the log file in case the index file is missed or corrupted.

Default value: false

MessageStorage.RequireRejectFlagSupport

Optional. If this option is enabled, FIX Engine will not rebuild index files for message storage, that does not support the embedded Reject Flag Marker.

Default value: true

MessageStorage.TimestampUnit

Optional. This property specifies precision of timestamps in session logs (.in / .out storage files). 

Possible values: "millisecond", "microsecond", "nanosecond".

Default value: millisecond

NewFeatures.EnableOptimizedPersistentMMIndex

Optional. This property enables the method of maintaining the start-up of FIX sessions with log files in the PersistentMM storage marked with the 'correctly stored' flag. If this property is set to 'true' FIXEdge will skip the check of the 'stored correctly' log files in order to improve performance.

Valid values:

• true - enables OptimizedPersistentMMIndex mode
• false - disables OptimizedPersistentMMIndex mode

Formats of PersistentMM log files with and without enabled NewFeatures.EnableOptimizedPersistentMMIndex property are incompatible.

Default value: true

Throttling parameters

Please refer to the How to configure FIX messages throttling in FIX Antenna C++ page for more details.

Throttlers

Optional. The property defines the list of throttlers being configured.

Example: Session.<SenderId>/<TargetId>.Throttlers = MyGeneralOutLimiter1, MyGeneralInLimiter2

Throttlers.<Throttler_Name>.Direction

Optional. The property defines the direction of the throttling.

Valid values: Outgoing, Incoming

Example: Session.<SenderId>/<TargetId>.Throttlers.MyGeneralOutLimiter1.Direction = Outgoing

Throttlers.<Throttler_Name>.Type

Optional. The property defines the type of throttling algorithm.

Valid values: SlidingWindowMessages

Example: Session.<SenderId>/<TargetId>.Throttlers.MyGeneralOutLimiter1.Type = SlidingWindowMessages

Throttlers.<Throttler_Name>.MessagesLimit

Optional. The property defines the number of messages within the time interval.

Example: Session.<SenderId>/<TargetId>.Throttlers.MyGeneralOutLimiter1.MessagesLimit = 50

Throttlers.<Throttler_Name>.IntervalMs

Optional. The property defines the throttling time interval in milliseconds.

Example: Session.<SenderId>/<TargetId>.Throttlers.MyGeneralOutLimiter1.IntervalMs = 2000

Unregistered Acceptors parameters

Scheduler parameters

TimezoneDB

Optional. Timeline CSV file where all valid time zones are defined. The scheduler works in UTC only.

Generic name of timeline file: date_time_zonespec.csv

FIXEdge.Scheduler.Threads

Optional. The number of threads for task execution.

Default value: 2

Changing the value of this parameter may impact the performance.

Schedule.<schedule_name>.TradePeriodBegin

Mandatory. Timetable for the beginning of the trading day.

Defined in the cron format. <schedule_name> is the schedule name.

Must not contain the value of global ListenPort.

SSLCACertificate

Optional if no peer certificate validation is required. The path to the file containing CA certificates - all in one file, PEM format only. 

CA certificates are used to build an accepted certificates list sent to peers as well.

SSLCertificate

Mandatory. Engine's SSL certificate file path.

SSLPrivateKey

Mandatory if ListenSSLPort is not empty. The path to the file containing the certificate private key. The certificate and private key can be the same file.

SSLCheckPrivateKey

Optional. Engine's SSL option is whatever to check if the private key matches the certificate.

Default value: false

SSLProtocols

Mandatory if ListenSSLPort is specified and optional otherwise. Engine's SSL protocols to use.

Used for all acceptor sessions and as default values for Initiator sessions.

It is a comma-separated list of protocols to use.

Valid values: SSLv2, SSLv3, TLSv1, TLSv1_1, TLSv1_2, TLSv1_3 (supported since versions FIXEdge 6.12.0 and FIX Antenna 2.29.0).

SSLRequireClientCertificate

Optional. Whatever client's certificate is mandatory.

Decline clients without a valid certificate if true. The default value is false.

SSLCertificatePassword 

Optional. Applicable only if the certificate is password-protected. A certificate's password. This password is used for the private key stored within the certificate file as well

SSLPrivateKeyPassword 

Optional if the private key is not password-protected. A private key's password.

SSLValidatePeerCertificate

Optional. If set to 'true' then client connections without a certificate will be rejected. Setting this property to 'true' requires an SSL engine to validate the counterparty's certificate against the CA certificate provided.

Default value: false.

SSLCiphersList 

Optional. The default OpenSSL built-in configuration is used in case of parameter absence.

The list is passed as is to OpenSSL during engine initialization in case of acceptor sessions (acceptor sessions are sharing the same configuration) and during session initialization in case of initiator sessions. See a list of the supported ciphers and list format is at the official OpenSSL site: https://www.openssl.org/docs/man1.0.2/apps/ciphers.html

TCP Protection parameters

ProtectionTCP.Enabled

The property enables TCP protection.

Valid values: true/false.

Default value: false.

ProtectionTCP.WaitLogon

The property to specify connection timeout (in milliseconds) of waiting for logon.

Disable when equal to 0.

Default value: 0

The property will be enabled only if ProtectionTCP.Enabled = true

ProtectionTCP.SizeWaitHostMax

The property specifies a maximum of connections waiting for logon from one host. When the number of connections from the same host exceeds the specified value of the property, new connections will be rejected.

Disable when equal to 0.

Default value: 0

The property will be enabled only if ProtectionTCP.Enabled = true

ProtectionTCP.SizeBufferMax

Specifies the maximum size (in bytes) of the buffer to be able to avoid the situation when users end up with high-loaded garbage. 

When the limit is exceeded, the connection will be closed and the corresponding reason will be written in the log.

The minimum size of the property which can be specified is 262144. If a lower value is specified in the property, it will be replaced with 262144 at the start of the FIXEdge.

If 0 is specified, there is no limit for the size of the buffer.

Default value: 0

The property will be enabled only if ProtectionTCP.Enabled = true

Other parameters

AnchorFile

Myricom.Dbl.TcpListenAddresses

Optional. DBL TCP listen address and port.

Format: <XXX.XXX.XXX.XXX>:<port>.

Myricom.Dbl.UseSocketAdaptor

Optional. This property tells how will be initialized Myricom DBL TCP API.

If set to 'true', it will use SocketAdaptor to emulate DBL API via generic sockets. The default value is false.

EnableDnsEntrySpoofingDetection

When it's set to true there is an enabled backward resolve-based DNS entry spoofing detection mechanism in DNS-related functions.

KeepMillisecondsInUTCTimeFields

Defines how to serialize UTCTimestamp or UTCTimeOnly field values:

0 - default mode -  if the value of milliseconds is not equal to 0 then it will be serialized.
1 - always serialize milliseconds
2 - always truncate milliseconds

Default value: 0