Transport adapter

Implementation

FEJ routing server provides the ability to integrate custom 3rdparty transports and use them for routing messages. For such goal server provides few interfaces for implementations:

Endpoint is a basic interface that represents instance of some entry, which could be unique identified by routing engine for receiving or delivering messages. EndpointParams provides unique id of such endpoint and other additional attributes, which may be useful for routing logic.

public interface Endpoint {
    EndpointParams getParams();
}

SourceEndpoint interface represent a provider of messages for routing engine.

public interface SourceEndpoint extends Endpoint {
    void setListener(SourceMessageListener listener);
}

It offers the ability to register listeners SourceMessageListener of incoming messages for external systems.

public interface SourceMessageListener {
    void onNewMessage(FIXFieldList message);
}

DestinationEndpoint represent a target of routing rules. It allows you to pass routed massage to the certain system.

public interface DestinationEndpoint extends Endpoint {
    /**
      * Send a {@link FIXFieldList} to this adapter. If the message is sent successfully,
      * the method returns {@code true}. If the message cannot be sent due to a
      * non-fatal reason, the method returns {@code false}. The method may also
      * throw a RuntimeException in case of non-recoverable errors.
      * <p>This method may block indefinitely, depending on the implementation.
      *
      * @param message the message to send
      * @return whether or not the message was sent
      */
     boolean send(FIXFieldList message);
}

There is also mechanism for registering such sources and destinations into server. After registration such endpoints will be accessible for routing engine. Registration of sources and destinations are independent. It means that you can register source and destination endpoint with the same id. This is especially important for bidirectional transports like FIX, where in and out connections are identified by the same parameters. For such transports exists 'BidirectionalEndpoint' interface.

public interface BidirectionalEndpoint extends ConsumerEndpoint, ProducerEndpoint {
}

Anyway, there are two separate interface for registering sources and destinations:

public interface SourceEndpointRegistry {
    void registerConsumer(SourceEndpoint consumer);
    void removeConsumer(String id);
}

public interface DestinationEndpointRegistry {
    void registerProducer(DestinationEndpoint producer);
    void removeProducer(String id);
}

Both they are implemented by EndpointRegistryAdapter class. it is available for accessing via Spring config:

<bean id="endpointRegistry" class="com.epam.fej.routing.endpoint.EndpointRegistryAdapter"
         c:destinationsRegister-ref="destinationsRegister"/>

JMS Transport Adapter

There are several ways to add JMS connectivity into FEJ container. fej-jms.xml configuration file already contains basic configuration for JMS adapter:

<bean id="jmsProperties" class="org.springframework.beans.factory.config.PropertiesFactoryBean"
      p:location="classpath:jms-adaptor.properties"/>

<bean id="jmsConfig" class="com.epam.fixengine.jms.config.Config"
      c:prefix="jms.adaptor"
      c:properties-ref="jmsProperties">
</bean>

<bean id="jmsConfigRegister" class="com.epam.fej.jms.DefaultJmsConfigsRegister"
      p:jmsManager-ref="jmsAdaptorManager"
      c:config-ref="jmsConfig" init-method="init"/>

<bean id="jmsClientFactory" class="com.epam.fixengine.jms.client.JMSClientFactory" factory-method="getInstance"/>

<bean id="jmsAdaptorManager" class="com.epam.fej.jms.JmsAdapterManager"
      c:endpointRegistry-ref="endpointRegistry"
      c:clientFactory-ref="jmsClientFactory"
      depends-on="rulesConfigManager"/>

jms-adaptor.properties file contains parameters for JMS producers and consumers (FIXAJ JMS Adaptor properties). jmsConfigRegister bean (com.epam.fej.jms.DefaultJmsConfigsRegister) is responsible for loading JMS session contexts (SessionContext) from configuration file and registering them with jmsAdaptorManager (com.epam.fej.jms.JmsAdaptorManager) for routing engine. JmsAdaptorManager builds source and destination endpoints adapters from given SessionContext objects and register them in server.

DefaultJmsConfigsRegister produces SessionContext via JmsContextFactory implementation. By default it uses com.epam.fej.jms.JndiJmsSessionContextFactory implementation but you can set you own implementation via DefaultJmsConfigsRegister.setJmsContextFactory(JmsContextFactory jmsContextFactory). Also you can use com.epam.fej.jms.SimpleJmsContextFactory with your definition javax.jms.ConnectionFactory

public SessionContext createSessionContext(JmsConfig config) {
    final ConnectionInfo connectionInfo = config.getConnectionInfo();
    final SessionInfo sessionInfo = config.getSessionInfo();
    return new SessionContext(connectionInfo, sessionInfo, null, jmsContextFactory.createContext(config));
}

final Properties additionalProperties = connectionInfo.getAdditionalProperties();

final Map<String, Object> additionalParams = sessionInfo.getAdditionalParams();

Custom connection factory instead of JNDI

Custom jms connection factory could be used in few ways:

1. Declaring ConnectionFactory in Spring and inject it in SimpleJmsContextFactory:

   <bean id="jmsConfigRegister" class="com.epam.fej.jms.DefaultJmsConfigsRegister"
         p:jmsManager-ref="jmsAdaptorManager"
         p:jmsContextFactory-ref="jmsContextFactory"
         c:config-ref="jmsConfig" init-method="init"/>
   
   <bean id="jmsConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory"
         c:brokerURL-ref="${jms.broker.url}"/>
   
   <bean id="jmsContextFactory" class="com.epam.fej.jms.SimpleJmsContextFactory"
         c:connectionFactory-ref="jmsConnectionFactory"/>

2. Implement your own JmsContextFactory and pass it as a parameter for DefaultJmsConfigRegister:

   public class ActiveMqJmsContextFactory implements JmsContextFactory {
       @Override
       public JMSContext createContext(JmsConfig config) {
           return new SimpleJmsContext(new ActiveMQConnectionFactory(
                   config.getConnectionInfo().getProviderURL()), config.getConnectionInfo());
       }
   }

   <bean id="activeMqContextFactory" class="com.epam.fej.jms.ActiveMqJmsContextFactory"/>
   
   <bean id="jmsConfigRegister" class="com.epam.fej.jms.DefaultJmsConfigsRegister"
         p:jmsManager-ref="jmsAdaptorManager"
         p:jmsContextFactory-ref="activeMqContextFactory"
         c:config-ref="jmsConfig" init-method="init"/>

Persistence API

Persistent API provides easy and fast way to storing data. It support two main storages: PersistentSequence and PersistentQueue.

PersistentSequence

PersistentSequence provides functionality for storing sequential data (for example, logs). Each record should have unique index. Indexer implementation is used to provide index for certain storing record. Also PersistentSequence requires custom Serializer implementation to serialize objects to byte buffer and restore it back.

PersistenceFactory factory = ...

Indexer<MyRecord> indexer = new Indexer<MyRecord>() {
    @Override
    public long getIndex(MyRecord item) {
        return item.getId();
    }
};

Serializer<MyRecord> serializer = new Serializer<MyRecord>() {
    @Override
    public void serialize(MyRecord item, ElasticByteBuffer buffer) {
        // serialize instance ...
    }

    @Override
    public MyRecord deserialize(ElasticByteBuffer buffer, int length) {
        MyRecord record = new MyRecord;
        // load data to instance...
        return record;
    }
};

final PersistentSequence<MyRecord> sequence = factory.buildSequence("seq_sample", indexer, serializer);

//store record to sequence
sequence.append(record);

In additional to storing data PersistentSequence provides methods for retrieving records from storage. It supports reading single item by index or iterating through items:

//get single item with index 100
final MyRecord myRecord = sequence.get(100);

//iterate items from index 0 till 100
sequence.retrieveItems(0, 100, new RetrieveSequenceItemsListener<MyRecord>() {
    @Override
    public void onItem(long id, MyRecord record) {
        //...
    }
}, true);

There is a possibility to review stored records and remove some of them from storage:

sequence.cleanUp(new CleanupItemListener<MyRecord>() {
    @Override
    public boolean checkForClean(long id, MyRecord item) {
        //return true to removed this record from storage
        return false;
    }
});

Or remove all and reset sequence:

//remove all items and reset index
sequence.reset();

Default PersistentSequence implementation is optimized for writing data and reading operations may take a bit more time.