Schedules configuration

FIXICC H2 allows configuring a schedule for one or more sessions.

A session starts and stops a connection according to the configured schedule.

You can go to the Server Schedules page by clicking View Schedules on the Server Sessions page.

Figure. The Server Sessions page with the View Schedules button.

Adding a new schedule

To add a new schedule:

1. Go to the Server Schedules page
   
   Figure. The Server Schedules page.
   
   
2. To add a new schedule, use one of the following options:
   • Click Add in the panel (item 1 in the figure above)
   • Click Add context menu item (item 2 in the figure above)
   • Press Ctrl+\ on your keyboard
     
     
3. FIXICC H2 opens the New schedule page:
   
   Figure. The New schedule page.
   
   

4. Enter a name for the schedule in the Schedule Name field.
   This parameter is mandatory. The schedule configuration cannot be saved if this field is empty.
   

   • If the Schedule name field is empty, the following alert form is shown:
     
     

   • If the schedule name is not unique, FIXICC H2 displays the following warning form:
     
     To return to the New schedule page, click the X.
     
     

5. Enter a value for the Start Time and/or Terminate Time parameters. At least one of these parameters should be specified.
   The Start Time and Terminate Time parameters follow either the (HH:MM(:SS)) time format or а CRON expression format.
   
   

   • Note

     Please pay attention: to separate the symbols in the CRON expressions it is necessary to use the " "(space).

     If the time parameter does not comply with the CRON format, FIXICC H2 displays the following warning form:

     

     To return to the New schedule page, click the X.

     
     

6. To configure resetting the sequence numbers of the sessions bound with the current schedule, check the Reset sequence numbers on start checkbox
   
   
7. To finish the operation, either:
   • Click OK to save the schedule configuration
     or
   • Click Cancel to cancel the operation
     • If the schedule parameters have been edited without saving, FIXICC H2 displays the following form:
       
       You can:
       • Click Save to save the entered values as a new schedule configuration
       • Click Don't save to skip the changes
       • Click Cancel to stay on the New schedule page

Modifying an existing schedule

To edit an existing schedule configuration:

1. Select the schedule from the schedules list configured for the server
   
   Figure. Modify the existing schedule.
   
   
2. To modify the selected schedule, you can:
   
   • Click Edit in the panel (item 1 in the figure above)
   • Click Edit in the context menu (item 2 in the figure above)
   • Press Ctrl+E on your keyboard

or

1. Go to the Schedule Details page
2. Click the Edit schedule item in the additional menu:
   • 
   • Figure. The Edit item from the additional menu.
3. FIXICC H2 opens the following page:
   
   Figure. The Modify schedule page.
   
   
4. Edit the desired values
   Note: The Start Time and Terminate Time parameters follow either the (HH:MM(:SS)) time format or а CRON expression format.
   

   Note

   Please pay attention: to separate the symbols in the CRON expressions it is necessary to use the " "(space).

   If the time parameter does not comply with the CRON format, FIXICC H2 displays the following warning form:

   

   To return to the Modify schedule page, click the X.
5. Make sure that:
   • At least one of the Start Time and Terminate Time parameters are filled
     
     
6. To finish the operation, either:
   • Click OK to save the schedule configuration
     or
   • Click Cancel to cancel the operation
     • If the schedule parameters have been edited without saving, FIXICC H2 displays the following form:
       
       You can:
       • Click Save to save the entered values as a new schedule configuration
       • Click Don't save to skip the changes
       • Click Cancel to stay on the Modify schedule page

Removing an existing schedule

To remove an existing schedule:

1. Go to the Server Schedules page
   
   Figure. Removing schedule operation.
   
   
2. Select the schedule you want to remove and either:
   
   • Click Remove in the panel (item 1 in the figure above)
   • Click Remove in the context menu (item 2 in the figure above)
     or
   • Press Ctrl+Backspace on your keyboard

or

1. Go to the Schedule Details page
2. Click the Remove schedule item in the additional menu:
   • 
   • Figure. The Remove schedule item from the additional menu.
3. FIXICC H2 then display the following confirmation form:
   
   Figure. The confirmation form.
   
   
4. To finish the schedule removal:

   • Click Yes to confirm the removal

     All sessions connected with the removed schedule start and stop with the server.

     or

   • Click No to cancel the operation

Monitoring

Server Schedules

То see a list of the configured schedules:

1. Go to the Server Sessions page by using one of the following paths:
   • Configurations > Servers > Show all servers > View > FIX (items 1→2→3→4 in the figure below)
   • Configurations > Servers > Show all servers > FIX (items 1→2→3→5 in the figure below)
   • Configurations > Servers > Show all servers (items 1→2→3→5 in the figure below), then double click the server name of interest
     
     Figure. The Servers page.
     
     
2. Continue your journey to the Server Schedules page by clicking View Schedules (see below)
   
   • Figure. The View schedules button.
     
     
3. FIXICC H2 opens the Server Schedules page in a new tab where you can see the list of configured schedules (see below)
   Figure. The Server Schedules page.
   

Filtering

You have the ability to filter the list of schedules by using the Default Filter (item 1 in the figure above).

You can filter the list by Name, Start Time, Terminate Time, Time Zone, or a combination of them.

You can also use the Extended Filter (item 2 in the figure above) for searching schedules.

Schedule Details

To see the dynamic state of a given schedule:

1. Click the schedule in the schedules table in the Table view layout part
   
   Figure. The Server Schedules page.
   
   
2. FIXICC H2 opens the Schedule Details page in the Object info layout part.
   
   
3. To open the Schedule Details page in a new tab, use one of the following options:
   
   • Click View in tab in the Object info layout part (item 1 in the figure above)
   • Click View in the Table view layout part (item 2 in the figure above)
   • Double-click the selected schedule
   • Click View in the context menu (item 3 in the figure above)
   • Click View sessions in the Scheduler section in the New session or Modify session pages
     
     

4. You can see the following schedule information on the Schedule Details page:

   • The schedule parameters
   • The list of sessions bound with the schedule

     • То filter the sessions list, use the Default Filter (item 1 in the figure below) or Extended Filter (item 2 in the figure below)

        Default Filter description

       The Default Filter depends on the type of objects that are shown on the current page.

       To use the Default Filter, type or select a value in the Default Filter fields.
       To start a search, move the focus from the completed field or press Enter.
       To reset the search results:

       • Click Clear (item 1 in the figure below)
         
         Figure. Default Filter.
         
         
       • Or click Clear in the context menu (as shown below)
         
         Figure. The Clear context menu item.

       Then you can see a full list of rows.

        Extended Filter description

       The Extended Filter allows adding custom search conditions.

       To add a new search condition:

       1. Click Add search condition (item 1 in the figure below)
          
          Figure. The Extended Filter.
          
          
       2. To specify the parameter you want to search for in the "Add condition" form, either:
          • Select it from the list
            or
          • Type the parameter name in the Filter field
            
            Figure. The "Add condition" form.
       3. To confirm your choice, click Select or to cancel the operation, click Cancel
       4. Select an operation type from the drop-down list according to the parameter type 
          
          Figure. The operations list.

       To start a search:

       Click Refresh (item 1 in the figure below)
       
       Figure. The Refresh button.

       To remove a filter condition:

       Click x to see the full list of objects
       
       Figure. The removing condition symbol.

       To reset search results:

       • Select the <Reset Filter> from the drop-down menu in the Refresh button
         
         Figure. Reset Filter operation.
         
         
       • Or click Clear in the context menu 
         
         Figure. The Clear context menu item.

       To save a filter:

       1. When you add a list of conditions, click the   button and select the save option
       2. Add the mandatory information to save the filter
       3. Click OK to confirm the changes or click Cancel to cancel the operation

       
       Figure. The Schedule Details page in a single tab.

     • To open the Session Dynamic State page of the session from the list:
       • Click the View in tab item in the context menu of the sessions table (item 3 in the figure above)
5. You have access to the following schedule operations:

• • Edit. Leads to the Modify schedule page for the current schedule
  • Remove. Leads to the confirmation form for the current schedule

Figure. The Additional menu.